Inverto Multiconnect IDLB-QUDL20-MULTI-OPP Quad 23mm LNB

This innovative LNB is designed for multiple satellite tv installations where the different satellite positions are (very) close next to each other, like Astra 1 and Astra 3 position. The used technology is based on dielectric materials and a perfect front-end design. This technology ensures maximum energy transfer from the antenna to the LNB, even when the LNB positione is not pointed to the central point of the antenna. And because of the long feedhorn of the LNB, it's possible to put multiple LNB's close to each other. This allows the reception of satellites which are very close to each other with their orbit position at one dish antenna; which is not possible with 'normal' LNB's. With this LNB the signal of one satellite position can be distributed to max 4 TV's or 4 satellite TV set-top boxes.

Technical parameters Inverto Multiconnect IDLB-SINL20-MULTI-OPP Quad 23mm LNB

• HDTV compliant: Yes
• Low Band Input Frequency Range: 10.7~11.7 GHz
• Low Band Output Frequency Range: 950~1,950 MHz
• Low Band LO Frequency: 9.75 GHz
• High Band Input Frequency Range: 11.7~12.75 GHz
• High Band Output Frequency Range: 1,100~2,150 MHz
• High Band LO Frequency: 10.6 GHz
• Noise Figure: 0.2dB typ. (0.7dB max.)
• LO initial accuracy: +/- 1.0 MHz max.
• LO Temperature Drift: +/- 3.0 MHz max.
• Noise Phase (@ 10 kHz): -90 dBc/Hz max.
• Conversion Gain: 60 dB min.
• Gain Ripple (Over 26MHz Bandwidth): +/- 0.75 dB/27MHz
• Gain Variation (Over Full Band) : +/- 4 dB
• 1 dB Compression Point (@ Output): 0.0 dBm min.
• Image Rejection: 40 dB min.
• Control Signal Ca (Vertical Polarization): 11.0~14.0 V
• Control Signal Cb (Horizontale Polarization): 16.0~20.0 V
• Control Signal Cc (Band Switching): 22KHz +/- 4KHz 0.4V – 0.8V pp
• Output VSWR: 2.0 : 1
• Temperature Range: -30~+60 °C
• Output Impedance: 75Ω
• Output Connector: F-type (female)
• Weight: 344 g